How it's made
From the first sketch to the final polish, these are the steps a ring goes through before it reaches you. Most pieces are made after you order and take about 12 to 14 business days.
-
Sketch
Each design starts as a drawing that sets the shape and the proportions of the piece.
-
3D design (CAD)
The drawing is turned into an exact 3D model on a computer, so every measurement is set before anything is made.
-
3D printed model
The 3D design is printed as a physical model, so the shape and the details can be checked and adjusted.
-
Mould
A mould is made from the approved model, so the design can be copied accurately.
-
Wax model
The mould is filled with wax to make a wax copy of the piece.
-
Casting
The wax copy is set in plaster and melted away. Molten gold or platinum is poured into the space it leaves. This is called lost-wax casting.
-
Filing
The cast metal is filed by hand to clean the edges and bring out the details.
-
Stone setting
The diamonds are set and the prongs are closed so each stone sits straight and secure.
-
Polishing
The piece is polished to bring out the shine of the metal.
-
Final check
Before it ships, the piece is checked: the stones, the prongs, the size and the finish.
Ready to choose yours?
Pick a design and make it yours: shape, metal and ring size.





